Fix System.IdentityModel.Selectors.dll errors
System.IdentityModel.Selectors.dll is a DLL file which is responsible for component System.IdentityModel.Selectors.dll in Windows systems like Windows 7 Professional Edition 64-bit. It was created on 7/13/2009 5:36:19 PM, the size is 126976 bytes and its version is 3.0.4506.4926.
System.IdentityModel.Selectors.dll can be infected by virus Backdoor:Win32/Delf.FC which spreads through social network Faces.com to download and install malware Power Memory Optimizer on the affected machines.
Once infected, the file path of System.IdentityModel.Selectors.dll will be re-set as:
And the software like PC game Freelancer, Web browser Mozilla 220.127.116.11 or antivirus Symantec Email Security.cloud can't start up, along with error message:
System.IdentityModel.Selectors.dll is missing or was not found.
When you restart your computer, you would receive System.IdentityModel.Selectors.dll blue screen of death (BSOD), along with stop error code:
System.IdentityModel.Selectors.dll error can be easily fixed by System.IdentityModel.Selectors.dll file repair tool DLL Suite:
1. Download, install and run DLL Suite
2. Click Start Scan to check System.IdentityModel.Selectors.dll errors
3. Click Fix ALL to repair System.IdentityModel.Selectors.dll problem
DLL Suite allows its users to download System.IdentityModel.Selectors.dll for free by taking the following steps:
1. Download, install and run DLL Suite
2. Click Start Scan to check System.IdentityModel.Selectors.dll file
3. Free download System.IdentityModel.Selectors.dll from the open web page
See all posts about this file error:
Can not install Net Framework 3.5
I was able to un-install Net Framework 3.5 SP1 in my add and remove programs. Then when I checked Show updates it is still listed in my add and remove programs with these updates applied I am using Windows XP Pro with SP3 When I tried to reinstall Net Framework 3.5 SP1 I get a setup Error with no Error code. Hotfix for Microsoft .Net Framework 3.5 SP1 (KB958484) [07/08/12,22:08:23] Section [Files - .NET Framework netfxperf.dll] - stop parsing entries [07/08/12,22:08:23] ****ERROR**** Verification failed for product .NET Framework 3.5
Hi Michael , I would suggest you to follow the steps mentioned in the following Microsoft articles and check if it helps. Method 1: Fix the problem with Microsoft Windows Update that is not working http://support.microsoft.com/mats/windows_update/ Method 2: I would suggest you to keep the computer in the Clean Boot mode while installing .Net framework. How to configure Windows XP to start in a "clean boot" state http://support.microsoft.com/kb/310353 Note: After clean boot troubleshooting step, follow the “Steps to configure Windows to use a Normal startup state” in the provided link to return your computer to Normal startup mode. Method 3: You may also try to repair .net framework by following the steps from the link below: http://support.microsoft.com/kb/923100 For reference: Version 1 of the Microsoft .NET Framework repair tool is available http://support.microsoft.com/kb/2698555 Hope this information is helpful.
Hi Michael , Try the following steps and check if it helps. Disable the Security Software installed in your computer. Important Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you shouldn't disable your antivirus software. If you have to temporarily disable it to install other software, you should re-enable it as soon as you're done. If you're connected to the Internet or a network while your antivirus software is disabled, your computer is vulnerable to attacks. Once done, I would suggest you to download the .net cleanup tool from the following link and remove all the .net frameworks installed in your computer. http://blogs.msdn.com/cfs-file.ashx/__key/CommunityServer-Components-PostAttachments/00-08-90-44-93/dotnetfx_5F00_cleanup_5F00_tool.zip After all the .net frameworks have uninstalled from your computer, restart the computer and then install each of the .net frameworks mentioned below in a order. Note: restart th
Once done, I would suggest you to download the .net cleanup tool from the following link and remove all the .net frameworks installed in your computer. http://blogs.msdn.com/cfs-file.ashx/__key/CommunityServer-Components-PostAttachments/00-08-90-44-93/dotnetfx_5F00_cleanup_5F00_tool.zip After all the .net frameworks have uninstalled from your computer, restart the computer and then install each of the .net frameworks mentioned below in a order. Note: restart the computer after installing each of the .net framework file. Note: I tried the link and this is the message I got: Oops! That page can’t be found. It looks like nothing was found at this location. Maybe try a search? This link didn't work - http://blogs.msdn.com/cfs-file.ashx/__key/CommunityServer-Components-PostAttachments/00-08-90-44-93/dotnetfx_5F00_cleanup_5F00_tool.zip Any ideas?
I have tried to fix the problem using Method 1: Fix it does not correct the problem and I can not reinstall Net Framework 3.5 SP1 with out the ERROR showing up (No Code, Just the word ERROR when Net Framework 3.5 tries to complete on install) Method 2: I might as well just format the drive and go for a clean install. Method 3: No Error codes to go by. Net Framwork will not install. Option Method 4: Would it be possible to just edit the registery and remove all links to these updates then install Net Framework 3.5? Hotfix for Microsoft .Net Framework 3.5 SP1 (KB958484) Update to .NET Framework 3.5 Service Pack 1 for the .NET Framework Assistant 1.0 x86 (KB963707) Security Update for Microsoft .NET Framework 3.5 SP1 on Windows XP, Server 2003, Vista, Server 2008 x86 (KB2604111) Security Update for Microsoft .NET Framework 3.5 SP1 on Windows XP, Server 2003, Vista, Server 2008 x86 (KB2657424) Hotfix for Microsoft .Net Framework 3.5 SP1 (KB953595)
Unhandled Exception with Dynamics 2011 in Office 2010
I'm starting to lose my mind on all this, but I'll post the problem and hopefully some can help me. For some reason, dynamics in outlook just stopped working. Here is the error: Microsoft .NET framework Unhandled exception has occurred in your application. If you click Continue, the application will ignore this error and attempt to continue. if you click Quit, the application will close immediately. Unknown name. (Exception from HRESULT: 0x80020006 (DISP_E_UNKNOWNNAME)). I've removed the temporary files in Dynamics from the Diagnostics tool. No change. I've even removed Dynamics CRM from outlook and re-installed it. No change. I'm extremely frustrated. I've got nothing left I can think of to try.
Did you find a solution for this? I'm experiencing the exact same problem. Thanks.
Hi John, Since your issue involves dynamics in Outlook, it would be best if you post your question in Outlook IT pro forum for better suggestions: http://social.technet.microsoft.com/Forums/en-US/outlook/threads Thank you.
Hi Tiera, This was some time ago, but I believe I ended up reformating the machine. It was a drastic step, but nothing else worked - I tried deleting and reinstalling the Dynamics Client for Outlook with no success. Unfortunately, I have a lot of problems with the Dynamics Client in particular. I'm afraid to even install updates.
Windows Resource Protection Problem
Running Windows 7 Starter Edition on an Asus EeePC netbook. Been uninstalling a lot of unnecessary programs and decided to restart and then run the sfc/scannow in an elevated command prompt. After it reached 96% I got the message "Windoes Resource Protection could not perform the requested operation.". I have saved the log file and it is listed below. What d o I need to do to correct? Shaun 2015-05-25 10:31:09, Info CSI 00000230 [SR] Verifying 100 (0x00000064) components 2015-05-25 10:45:55, Info CSI 0000042d [SR] Verifying 100 (0x00000064) components 2015-05-25 10:45:55, Info CSI 0000042e [SR] Beginning Verify and Repair transaction
Do you have a system restore point with a date and time before you started removing software? Select Start, Control Panel, System, System Protection, System restore, Next. You may need to check the box before Show more points and click Next to see earlier restore points.
Gerry C J Cornell. Unfortunately after I had finished the batch of uninstalls I restarted the system, checked that it seemed to be running OK, Then I removed all the restore points and turned off restore before running the SFC command. Shaun
SP Probably not a good idea to remove things that you do not know. In your case I would start by removing and re-installing all the net framework files, and the Chinese language pack. If you do not know how (or do not want to) it may be faster to do a repair install from the win 7 dvd/USB
ZigZag3143. I didn't remove any of the .net framework files. It was mainly Visual Basic, Visual C++ (not the latest runtime) and SQL installs. Shaun
I am receiving the below error when trying to complete a specific action with Sage 50. Never used to get this error. Please see below and advise on how to fix this. See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box. ************** Exception Text ************** System.NullReferenceException: Object reference not set to an instance of an object. rather than be handled by this dialog box. ***Post moved by the moderator to the appropriate forum category.***
Hi, To better help you with this concern, we suggest that you contact the software developer. Feel free to post back should you need further assistance.
unable to use efps application
I'm unable to use efps. I have .net 4.5.2 installed, win's 7 32 bit. See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box. ************** Exception Text ************** rather than be handled by this dialog box. how can i resolve it?
Hi, Thank you for posting your query on Microsoft Community. I would suggest you to re-post your query on MSDN Forums as we have experts working on such type of issues and to help you in a better way. Refer to the link: https://social.msdn.microsoft.com/Forums/en-US/home Hope this information helps. Please let us know if you need any other assistance with Windows in future. We will be happy to assist you.
At least one .NET 3.5 assembly missing in Windows 8 Release Preview / Windows Server 2012 RC
I've noticed the following issue in Windows 8 Release Preview / Windows Server 2012 RC (and been able to reproduce it on three different installations): When installing .NET Framework 3.5 via "Programs and Features", the following assembly will not be installed: * System.IdentityModel.Selectors.dll The problem is, that it is still referenced by System.ServiceModel and can thus lead to exceptions when reflecting the assemblies. Is this a known issue that will be fixed for the RTM? Regards, Michael
Hello, of course, I tried this before - the installer doesn't even start! Any other suggestions?
The command is slightly different in this doc - scroll down to bottom How to install DotNet 2.0 or 3.5 on Windows 8 http://devonenote.com/2011/09/how-to-install-dotnet-2-0-or-3-5-on-windows-8/ Enable .NET Framework 3.5.1 on Windows 8 Developer Preview to Run Applications http://techdows.com/2011/09/enable-net-framework-3-5-1-on-windows-8-developer-preview-to-run-applications.html
Smittychat, thank you for those links. Unfortunately, the first one is exactly the same as the one from slance pointing to msdn. The second one only differs in that it allows Windows Update for the installation, which makes it even more identical to the regular feature installation via the GUI, from what I can discern. The problem appears to be located *inside* the installer and all the described ways use the *same* installer. Regards, Michael
Hi, I had to do this with both the CP and RP versions. As far as the DVD goes, I think we are both talking about the same thing. I included a Microsoft link to verify. It is the trouble shooting tip near the bottom of the page. http://msdn.microsoft.com/en-us/library/hh506443(v=vs.110).aspx
Hi, Your situation must be a bit different than mine, as the full installer ran properly and successfully. I know that .Net 3.5 is part of Win 8, but the problem seems to be that the Win 8 installation process doesn't copy the files to the hard drive. Therefore, when you try to turn it on, it doesn't work. There is another fix that copies the files from the installation DVD or ISO that will resolve the problem also, but at the moment I can't find it. A google search may turn it up. Did you try the full installer of 235mb or so, or the web installer?
Hello slance! I'm with Tommy. Since it's now a native feature of Windows 8, the installer is no longer viable and will be redirected to installing the feature. If you have the feature already installed, the installer simply shuts down again without any indication of what's going on or that it, in fact, has shut down already. I'm guessing that's due to the prerequisite magic Microsoft baked into .NET and Windows 8 and the official installer for .NET 3.5 simply enacts the prerequisite. Thus, if it's already fullfilled, there's not need to say anything to the user. Regards, Michael
Earlier, did you try using your Windows 8 installation media as described in the following? Installing .NET Framework 3.5 in Windows 8 Consumer Preview http://tinyurl.com/d3usd7j Several more links relating to the subject found here: http://blogs.msdn.com/search/searchresults.aspx?q=Windows+8%3a+.net+framework
Hi slance! Yes, I did use the full installer, and in fact, the very link you posted and verified that it is, indeed, 235MB. Did you try this using the Release Candidate or an earlier version? As for the DVD: Are you referring to enabling the feature using the command prompt when the install files are not available in Windows? This is the case with Windows Server 2012 RC and it had the same result as when I did the regular feature install in Windows 8. Regards, Michael
Hello, Try this link to the full installer. http://download.microsoft.com/download/2/0/e/20e90413-712f-438c-988e-fdaa79a8ac3d/dotnetfx35.exe
Hi slance! Thanks. Yes, I was referring to the Dism tool. As I mentioned above, it didn't solve the issue on Windows Server 2012. Regards, Michael
|System.IdentityModel.dll download free||System.IdentityModel.ni.dll fix||System.IO.Log.dll error||System.Management.Automation.dll download||How to install System.IdentityModel.Selectors.dll|